DIMAS BUDIARTO (2020) PERANCANGAN DAN PEMBUATAN ALAT VACUUM BAGGING. D3 thesis, Universitas Muhammadiyah Yogyakarta.

[thumbnail of COVER] Text (COVER)
COVER
Download (229kB)
[thumbnail of HALAMAN JUDUL] Text (HALAMAN JUDUL)
HALAMAN JUDUL
Download (1MB)
[thumbnail of HALAMAN PENGESAHAN] Text (HALAMAN PENGESAHAN)
HALAMAN PENGESAHAN
Restricted to Registered users only
Download (565kB)
[thumbnail of ABSTRAK] Text (ABSTRAK)
ABSTRAK
Download (264kB)
[thumbnail of BAB I] Text (BAB I)
BAB I
Download (338kB)
[thumbnail of BAB II] Text (BAB II)
BAB II
Restricted to Registered users only
Download (521kB)
[thumbnail of BAB III] Text (BAB III)
BAB III
Restricted to Registered users only
Download (451kB)
[thumbnail of BAB IV] Text (BAB IV)
BAB IV
Restricted to Registered users only
Download (495kB)
[thumbnail of BAB V] Text (BAB V)
BAB V
Restricted to Registered users only
Download (88kB)
[thumbnail of DAFTAR PUSTAKA] Text (DAFTAR PUSTAKA)
DAFTAR PUSTAKA
Restricted to Registered users only
Download (88kB)
Official URL: http://repository.umy.ac.id/handle/123456789/35592

Abstract

Vacuum bagging is the process of making composite products by utilizing the vacuum air in the mold. Vacuum bagging consists of connector valves, resin suction hoses, tubes, bagging films, vacuum pumps and molds. The purpose of this research is to design and manufacture vacuum bagging connector tools as well as supporting tools and analyze the performance of vacuum bagging tools with pressure adjusters . Tests with low and high stages, Process 1 for the low stages, the results obtained absorption flow from the resin that enters the breathercloth takes more than 15 minutes which causes the specimens in the old mold to dry and harden. Process 2 for the high stage, the results of the power flow absorption of resin that enters the breathercloth faster, then within ± 5 minutes the specimen process can dry and harden. From process 1-2 it can be concluded that the results of process 2 are good, because the results obtained are better than process 1, while the results of process 1 the product results are still wet and slow to dry. The design of the Trap connector bag for Vacuum bagging was successfully designed and made later. The working principle of the vacuum bagging tool is done by adjusting the hight pressure (0.8) Bar.

Dosen Pembimbing: UNSPECIFIED | UNSPECIFIED
Item Type: Thesis (D3)
Uncontrolled Keywords: VACUUM BAGGING; PRESSURE ADJUSTMENT; TRAP CONNECTOR
Divisions:
Depositing User: Unnamed user with email Admin Perpustakaan 1
Last Modified: 09 Oct 2025 02:24
URI: https://etd.umy.ac.id/id/eprint/57787

Actions (login required)

View Item View Item